BHT-BASIC4.0 Program Converter

Conversion tool that translates BHT-BASIC 3.6 format program into BHT-BASIC 4.0 format

• BHT-BASIC4.0 Program Converter

This software can be downloaded from QBdirect

Each region has different availability of sales product.

■ Developing BHT-300 Programs with BHT-BASIC3.6 Compiler
The PD3-based programs created by the BHT-BASIC3.6 compiler can be converted to the programs that can run on the BHT-300 Series scanners (BHT-BASIC4.0 system).

If you already have the BHT-BASIC3.6 compiler, you do not need to implement the BHT-BASIC4.0 compiler for developing a program for the BHT-300 Series.(1)

■ Usable Existing Assets

Usable Existing Assets The BHT applications configured in the conventional BHT-BASIC3.6 environment can be used on the BHT-300 Series scanners by converting them with a program converter.*(2)

■ Notes On Program Conversion

Take heed to the following notes when converting the BHT-BASIC3.6 programs into BHT-

BASIC4.0 programs.

- (3)A PD4 format file cannot be transmitted by the Transfer Utility or Ir Transfer Utility. Its program shall be converted into a PD3 format for transmission.
- (3)Development of program is limited within the functional range of BHT-BASIC3.6 and features extended by BHT-BASIC4.0 are not available.

1. See the notes described below.
2. Any different elements in the hardware between the BHT-300 and the conventional models shall be adjusted accordingly on the corresponding source program.
3. However, these expansions apply only to the BHT-300 Series scanners. The BHT-7000/BHT-7500/BHT-8000/BHT-100 Series still use the existing BHT-BASIC3.6 basic elements.