GT10Q-SB 2D (Bluetooth®)Bluetooth® wireless 2D code scanner
| Model | Wireless Communication | User's Manual |
|---|---|---|
| GT10Q-SB | Bluetooth | Download Manual |
Each region has different availability of sales product.
Features
Connectable to a wide range of devices
Built-in Bluetooth® wireless technology facilitates connection with a wide range of devices.
Improvement in workability with wireless connection
Because there are no cables, the GT10B can be installed anywhere (Min. 10m, with no obstructions).
Can be connected by simply scanning the bar code underneath the communication unit.
4 data-saving functions
No connection error
Multiple units can be used simultaneously by specifying where to connect.
Transmission Confirmation (planned)
Accurate data transmission possible with ACK/NAK protocol built-in.
Data Check (planned)
Error correction code included in the data helps prevent missing and substitution of the data.
Scan Lock
Prevents scanning in the event of disconnection.
Function to notify decline in battery voltage
Beeper and LED alarm function to warm of decline in battery voltage(planned).
An orange LED will flash at 200 mm second intervals and a beeper will sound 5 times.
Extended operating time
Eight hours of operating time possible even with a constant Bluetooth ®connection (at one scan per 5 seconds).
Rapid Recharging
Battery can be charged in approx. 2.5 hrs with the exclusive unit charger (CH-GT10N).
Superior scanning performance
Realizes rapid scanning of bother 2D and bar codes (twice the speed(1) of conventional units).
Improved scanning of poorly printed 2D code labels (Compared with other DENSO models).
Divers scanning features
Target Pointer Mode
Enables pinpoint aiming and scanning, even with multiple codes in the scanning area.
Multiple Bar Code Scanning Mode
Instantly scans multiple bar codes at once.
Bar Code Reader Mode
Achieves high speed scanning equal to traditional inner scanners.
Single Scanning Mode
Realizes single scanning of QR code combinations.
World- leading impact resistance
With a stronger body and the use of impact-resistant rubber, the scanner can survive a 2 m drop-the highest standard in the world.
Superior environmental endurance
After many years of developing high quality technology, IEC International Standards Protection Class IP54 (equivalent to JIS splash resistance) has been achieved, preventing water and dust from infiltrating the scanner.
Superior handing
Area Marker
Laser illumination of scanning area and center of scanning area Tri-color Extra Bright LED
Tri-color Extra Bright LED
Tri-color Extra Bright LED
Vibrator Function
Scan completion confirmed by vibration
Adjustable Beeper Volume
3 levels of beeper volume to suit the surrounding environment
Wide range of Functions
Code comparison
Determines if a code being scanned matches a master bar code registered in the GT10Q.
Data Editing Function
Sorts scanned barcode data and prints out only necessary data.
Use of magic key
Wireless connection control
Wireless connection can be disconnected by pressing and holding the magic key for a few seconds. Reconnect by switching the trigger ON.
Marker switch control for easier pinpoint scanning
Code type switching
Two types of code can be pre-registered to enable easy switching between the two types of code by turning the magic key ON.
Scanning ON/OFF feature
Turn the magic key OFF to suspend scanning, and ON to resume.
Transmission of designated characters
Data that is already stored (e.g. operations initiation code) can be sent by switching the magic key ON.
Retransmission of scanned data
Scanned data can be retransmitted when the magic key is ON so the bar code does not need to be repeatedly scanned.
Activating and ending Bar Code Reader Mode
Operation of a single magic key activates or ends Bar Code Reader Mode.
Utility Software for Easy Programming
GT10Q is readily available by using the QR_kbif keyboard interface software that allows easy programming without the need to create a serial communication program. QR kbif
Driver for USB interface is available at: Download "USB-COM driver" (Free)
Specifications
| Type | GT10Q-SB | ||
|---|---|---|---|
| Scanner | System | Area scanning | |
| Scanning Area (1) | 59 mm x 44 mm | ||
| Scannable codes | 2D codes | QR Codes, Micro QR Codes, DataMatrix (ECC200), PDF417, Micro PDF, MaxiCode, GS1 Databar Composite | |
| Bar codes | UPC-A/E, UPC/EAN(with add-on codes), Interleaved 2 of 5(ITF), CODE39, CODABAR (NW-7), CODE128, GS1-128, GS1 Databar | ||
| Resolution | 2D codes | 0.25mm | |
| Bar codes | 0.15 mm | ||
| Scanning Confirmation | 3-color LED (red, blue and green), | ||
| Beeper (with volume control), vibrator | |||
| Image capture function | Yes | ||
| Marker | Area Maker | ||
| PCS Value | 0.45 Min. | ||
| I/F | Standard | Bluetooth ® Ver1.1 Power class2 | |
| Profile | Serial Port Profile (SPP) | ||
| Power Supply | Main Battery | Exclusive battery pack | |
| Operating Hours | Approx. 8 hours | ||
| Environmental | Operating Temp. | 0-50°C (2) | |
| Requirements | Water-/Dust Proof | IP54(Equivalent to JIS splash resistance) | |
| Shock Resistance (3) | 2m (Concrete floor) | ||
| Operating Humidity | 10-90% RH (no condensation or frost) | ||
| Operating ambient illumination | 20-10,000 lux (Daylight florescent lighting) | ||
| Weight | Approx. 260g | ||
- Narrow bar width 0.5mm or over, ambient illuminance over 500lx, (standard position)
- 0-40 °C for charging.
- Tested value, not guaranteed.
Dimensions
Scanning Performance
Options
GT10Q-SB Option list
Communication/charging
- BA10-RKU
Stand
- S-GT10
- ♦Desktop stand/wall stand
- S-GT11
- ♦Desktop stand/wall stand
Hang strap from ceiling
- H-GT10
- ♦Secures GT10 in place while bar code is held up and scanned
- H-GT11
- ♦Secures GT11 in place while bar code is held up and scanned
Neck strap
- NSBHT-8000
Belt Holster
- K-GT10
Hang strap from ceiling
- T-GT10
Related Software
Related Software Lineup
Setting Software
Software for various parameter settings of the handy scanner made by DENSO WAVE
-
Scanner Setting 2D (Free)
Software which sets up each parameter of GT10Q from PC
Keyboard Interface Software
Software which converts the data from a scanner like input from a keyboard
-
QRkbif (Free)
Software which receives the information read by a scanner and converts the data as if it was input from a keyboard