Compact & lightweight scanner ideal for POS or PC connection
- Ultra lightweight and Ergonomic Design
- Wider Bar Code Reading
- Complete Range
Ultra lightweight and Ergonomic Design
At almost 120g [4.2oz] (excluding cable), the HC36 weighs less than other similar models previously available, for all-day use without fatigue.
Wider Bar Code Reading
Held further away, the HC36 can read the bar code of up to 200mm (7.9") wide, something that has been a problem for conventional CCD scanners. This new feature makes the HC36 a valuable tool in a wider range of uses, for example in distribution.
The HC36 is available in two types, the conventional "touch reading type" and new "distance reading type and with various interface options, including RS-232C, OCIA, CMOS/bar-image, and keyboard emulation.
|Type||Touch Reading Type||Distance Reading Type|
|Model||HC36II R,HC36II TR||HC36II TK-A||HC36II TU-K||HC36II DR, HC36II DTR||HC36II DTK-A||HC36II DTU-K|
|Reading Width||61mm||It varies according to minimum bar width (Refer to reading range figure).|
|(Incl. Right and left margin)|
|Readable codes||EAN-13/-8(JAN-13/-8), UPC-A/-E/-D3(1), UPC/EAN (With add-on codes), Interleaved 2 of 5, CODABAR (NW-7), CODE39, CODE93, CODE128(EAN-128), Standard 2 of 5||JAN-13/-8, UPC-A/-E, EAN-13/-8, UPC/EAN (With add-on codes), Interleaved 2 of 5, CODABAR (NW-7), CODE39, CODE128, EAN-128, STF (Standard 2 of 35), CODE93|
|Resolution (In the case of CODE39)||0.15mm (0.125mm)(2)||Touch reading: 0.19mm, Distance reading: Refer to reading range figure|
|Number of maximum reading digits (In case of ITF)||48 digits||30 digits|
|PCS value||not less than 0.45||Touch reading: 0.45 or more, Distance reading: Refer to reading range figure|
|Reading Direction||Both forward and reverse bar codes can be read.|
|Light Source||Red LED (λ=660nm)|
|Scanning Confirmation||LED (green), Buzzer|
|Communications||I/F||RS-232C||Keyboard Emulation(4)||USB interface(5)||RS-232C||Keyboard Emulation(4)||USB Interface(5)|
|I/F||Cable||Straight/Curl||Straight / Y-form||Straight||Straight/Curl||Straight / Y-form||Straight|
|Connector Form||Dsub-25P, Dsub-9P, DIN-8P||Mini DIN6P||USB TypeA||Dsub-25P, Dsub-9P, DIN-8P||Mini DIN6P||USB TypeA|
|Input power supply||Operating voltage range||4.75 to 5.25V||4.5 to 5.5V||4.4 to 5.25V||4.75 to 5.25V||4.5 to 5.5V||4.4 to 5.25V|
|Power consumption(In case of DC5.0V)||Reading: 110mA, Standby: 35mA||Reading: 50mA, Standby: 6mA||Reading: 60mA, Standby: 20mA, During suspended: 500µA (max.)||Reading: 110mA, Standby: 10mA||Reading: 80mA, Standby: 6mA||Reading: 75mA, Standby: 10mA, During suspended: 500μA (max.)|
|Environment Requirements||Temperature||0 to 40°(without dews)|
|Humidity||10 to 90%RH (without dews)|
|Illumination||3000lx or less (Under a fluorescent lamp in daytime)||500-3000lx (Under daylight fluorescence color)|
|Weight (excl. cable)||Approx. 100g||Approx. 185g||Approx. 150g||Approx. 100g||Approx. 185g|
|Trigger switch mode selection||5 mode selection type (Auto-off / Momentary / Alternate / Continuous reading / Repeat)||2 mode selection type (Auto-off / Continuous reading)|
- UPC-D3 supports only HC36 IIR.
- Figures in () can be performed in case of PCS of 0.9 or more and power supply voltage of 5V.
- In case of using JIS standard label of JAN monochrome 13 digits.
- For IBM PC/AT, IBM compatible units
- Corresponding OS is Windows 98/2000/Me/XP.
Power supply BOX for HC36 P-200
It generates DC power supply required for operating a bar code hand scanner or a built-in scanner from AC power supply (100V).
- Operation guide
- Instructions manual can be downloaded from our technical support site QBdirect.
Related Software Lineup
Keyboard Interface Software
Software which converts the data from a scanner like input from a keyboard
Software which receives the information read by a scanner and converts the data as if it was input from a keyboard